Home » Blog » Study – Design & Installation – Extinguishment-fire-panel

Study – Design & Installation – Extinguishment-fire-panel

Study – Design & Installation – Extinguishment-fire-panel

Extinguishment fire panel used to alarm and extinguish fire when incident happening. Extinguishment fire system consist of:

  • Control center, control panel is most important factor.
  • Sprinkler and pipeline system.
  • Pump extinguishment fire: Electric pump, compensational pump, diesel pump.
  • Valve system and preasure and flow sensor

Tủ phòng cháy - chữa cháy - PCCCTram bom PCCC

Through sensor system, control center panel always automatically maintain preasure in pipeline from threshold settings. ( high threshold: 8k, low threshold, adjust for requires).

  • When electricity is ready: If preasure less than 8k then prioritory for compensation pump, if it is greater 8k then it will automatically stop.
  • If pensational pump is runing but less than 8k then preasure will decrease under 4k then electric pump will automatically active to 7.5k, then electric pump will stop and pensational pump will reactive till it gain 8k then stopping.

Besides, control panel has Man operation mode to control ON/OFF through bottons and switches for every pump.

In Control panel, is set up protection phase, voltage and heat for Pump, has output signal to switch of ACB/ MCCB for MSB panel when incident happening to isolate for entire system.

Technical characteristics:

  • Enclosure made by with steel, powder croating or Inox, tole 1.2-2.5mm.
  • Colour: RAL 7032/ 7035
  • Allowed to select Auto/ Man mode.
  • Pump start system: DOL, Y/D, Soft start, Inverter.
  • Protection system with preasure switches, water level Relay.
  • Charging mode for Pump diesel.
  • Manufacturing standard: IEC 61439-1/2
  • Designing symbol standard: IEC 606 17
  • Protectionstandard: IEC 60529
  • Component standard: IEC 60947
  • Protection level: IP 2X, 3X, 42, 43, 54.
  • Panel form: 1, 2A, 2B
  • Integrated proctection for voltage, currnet, flow, phase, heat.
  • Displaying information: V, I, F
  • Component program and monitoring through PLC
  • Connecting support with BMS system, Extinguishment fire system
  • Integrated monitoring, remote control through network communication through Modbus, Profibus, internet.

For more details, please contact with Mr. Vinh: 0908 488 633/ 0969 553 557

You can see our video on youtube with (Design guided by Hữu Vinh)

 

Share

Related Posts

Study – Design & Installation – Main Distribution Board (MDB Panel)

Main distribution doard is branch distribution, used to supply electricity for a system of machiner and component or one floor of building, apartment…MDB panel used to set up behind...

Study – Design & installations – Pump control panel

Pump control panel is designed to control the startup mechanism (DOL, Y / D, Soft start, Inverter, ...) to On/ Off the pumping process of a system of pumps. through...

Study – Design & Installation – Distribution Board (DB Panel)

Distribution doard is branch distribution, used to supply electricity for a system of machiner and component or one floor of building, apartment…DB panel used to set up behind MSB...

Study – Design & Installation – Low Voltage panel (LV Panel)

Low voltage panel (LV Panel) or transformer panel, it can be seen the same MSB panel. LV Panel is set up behind Transformer. Normally, it is only one ACB/...

Study – Design & Installation – MSB panel (Main Switch Board Panel)

The MSB (Main Switch Board) is a Main Panel used to supply power for the entire system. It can combine  with the other modules ( It’s function is input,...

Reasons makes capacitor damaged and swelled – How to repair

Definition about Capacitor: Capacitor is a kind of passive electronic component created by two conductive surfaces and separated by dielectric. When voltage difference on two conductive surfaces is alternating voltage,...

Study – Design & Installation – Automatic Power Factor Control Panel ( APFC Panel)

APFC Panel is called as automatic power factor control panel . It is often set up with Main Switch Board Panel ( MSB Panel) or Low Power Panel. It...

Study – Design & Installation – Automatic transfer switch Panel ( ATS Panel)

ATS Panel  is automatically transfers switch between main powers and spare powers, with purpose of maintain electric system is always ready in case main power is lost. Spare power...

Study – Design & Installation – Automatic Control Panel

The purpose of  Control Panel for controlling, monitoring processes of  a control system and power through program component, switchgear and sensor with direct control or through industrial communication network.   Control...

What is harmonics? – Reasons makes harmonics- Harmonics filter system

Definition of harmonics filter reactor Harmonics filter reactor is a noisy form, featured by complete vibration on basic industrial spectral frequency. Harmonics filter reactor in AC power is definited as...